- Origin: CN(Origin)
- is_customized: /
- Item Length: 12cm
- OEM NO.: /
1、Compatible Models: 2003 2004 2005 2006 2007 2008 2009 for Toyota 4Runner 4.0L-V6, for 2007 2008 2009 for Toyota Cruiser 4.0L-V6, for 2005 for Toyota Tundra 4.0L-V6, for 2005 for Toyota Tacoma 4.0L-V6.
2、OE Number: 23250-31060 23250-39075 23209-39075.
3、High Performance: Compared with the original injector, and the atomizing is good, the combustion is more thorough, the power is increased, and the fuel is more economical.
4、Wide Features: Accelerate more smoothly, shift gears smoothly without frustration, reduce knocking, improve knocking phenomenon during rapid acceleration, no more frustration when the air conditioner starts and stops, energy saving and emission reduction.
5、Package Included: 6*Fuel Injectors. If you have any questions, please contact us on jobs days and we will make it right for you within 24 hours.
Our fuel injectors are high performance and premium to replace those original parts.
Clean up the environment around the fuel injector to avoid dirt being entrained in the engine when the fuel injector is subsequently disassembled, causing unnecessary pollution.
Relieve the fuel pressure, and then remove the intake manifold cover and intake manifold.
First unplug the plug from the injector. Then disconnect the vacuum pipe and the fuel return pipe from the fuel pressure regulator, and then disconnect the fuel hose from the distributor.
Removing the fixing nuts on the distributor and the wiring harness frame. Removing the distributor, and then remove the injector from the distributor.
Install a new gasket on the injector. Pay attention to apply a clean oil layer on the new O-ring first, and then install it on the injector.
First insert the fuel injector into the distributor. Then pay attention to apply a clean oil layer on the new sealing ring, and then press the injector into the intake manifold. (Note that the 0 ring is damaged, the injector should be installed on the distributor first, and then on the intake manifold)
Replace the fuel hose with a new gasket and connect it to the distributor. Then connect the injector and the plug on the wiring harness, and connect the vacuum hose and oil return pipe to the fuel pressure regulator.
Install the intake manifold and intake manifold cover.
Turn on the starting switch, but do not start the engine. After the fuel pump runs for about 2 seconds, the fuel line pressure increases. Repeat the above two or three times, and then check for oil leaks.
For Toyota 4Runner 2009 Limited, SR5, Sport 4.0L V6-Gas
For Toyota 4Runner 2008 Limited, SR5, Sport 4.0L V6-Gas
For Toyota 4Runner 2007 Limited, SR5, Sport 4.0L V6-Gas
For Toyota 4Runner 2006 Limited, SR5, Sport 4.0L V6-Gas
For Toyota 4Runner 2005 Limited, SR5, Sport 4.0L V6-Gas
For Toyota 4Runner 2004 Limited, SR5, Sport 4.0L V6-Gas
For Toyota 4Runner 2003 Limited, SR5, Sport 4.0L V6-Gas
For Toyota Cruiser 2009 Base 4.0L V6-Gas
For Toyota Cruiser 2008 Base, Trail Teams Special Edition 4.0L V6-Gas
For Toyota Cruiser 2007 Base, Special Edition 4.0L V6-Gas
For Toyota Tacoma 2005 Base, Pre Runner, X-Runner 4.0L V6-Gas
For Toyota Tundra 2006 Base, SR5 4.0L V6-Gas
For Toyota Tundra 2005 Base, SR5 4.0L V6-Gas
23250-31060 23250-39075 23209-39075
Due to the lighting effects and shooting angles, the color of the item and that shown in the picture might have a nuance.
Due to manual measurement, there might be a tolerance in the product size.