4pcs/Set Fuel Injector Auto Replacement Parts For Toyota Tacoma 2000-2004 OEM Number 23250-75080 23209-79135 High Performance
$35.93 – $37.90
Description
- Origin: CN(Origin)
- OEM NO.: 23250-75080 23209-79135
- Feature 3: car accessories
1、Compatible Models: Fits for Toyota Tacoma 2000-2004, for Toyota 4Runner 2.7L-L4 2000.
2、OE Number: 23250-75080 23209-79135.
3、High Performance: Compared with the original injector, and the atomizing is good, the combustion is more thorough, the power is increased, and the fuel is more economical.
4、Wide Features: Accelerate more smoothly, shift gears smoothly without frustration, reduce knocking, improve knocking phenomenon during rapid acceleration, no more frustration when the air conditioner starts and stops, energy saving and emission reduction.
5、Package Included: 4x injectors. If you have any questions, please contact us on jobs days and we will make it right for you within 24 hours.
Description:
Our fuel injectors are high performance and premium to replace those original parts.
Installation:
Clean up the environment around the fuel injector to avoid dirt being entrained in the engine when the fuel injector is subsequently disassembled, causing unnecessary pollution.
Relieve the fuel pressure, and then remove the intake manifold cover and intake manifold.
First unplug the plug from the injector. Then disconnect the vacuum pipe and the fuel return pipe from the fuel pressure regulator, and then disconnect the fuel hose from the distributor.
Removing the fixing nuts on the distributor and the wiring harness frame. Removing the distributor, and then remove the injector from the distributor.
Install a new gasket on the injector. Pay attention to apply a clean oil layer on the new O-ring first, and then install it on the injector.
First insert the fuel injector into the distributor. Then apply a clean oil layer on the new sealing ring, and then press the injector into the intake manifold. (Note that the 0 ring is damaged, the injector should be installed on the distributor first, and then on the intake manifold)
Replace the fuel hose with a new gasket and connect it to the distributor. Then connect the injector and the plug on the wiring harness, and connect the vacuum hose and oil return pipe to the fuel pressure regulator.
Install the intake manifold and intake manifold cover.
Turn on the starting switch, but do not start the engine. After the fuel pump runs for about 2 seconds, the fuel line pressure increases. Repeat the above two or three times, and then check for oil leaks.
Compatible models:
Fist for 2000-2004 for Toyota Tacoma, 2000 for Toyota 4Runner 2.7L-L4
OEM number:
23250-75080 23209-79135
Packing List:
4pcs*Fuel Injector
Notes:
Due to the lighting effects and shooting angles, the color of the item and that shown in the picture might have a nuance.
Due to manual measurement, there might be a tolerance in the product size.
Additional information
Ships From | |
---|---|
Color | Pink |
Quick Comparison
Settings | 4pcs/Set Fuel Injector Auto Replacement Parts For Toyota Tacoma 2000-2004 OEM Number 23250-75080 23209-79135 High Performance remove | 11127588412 Engine Valve Rocker Cover For BMW 3S 320i, 328i xDrive Head Covers remove | Interface 63mm Single/Dual Outlet Universal Car Exhaust Tip Stainless Steel Auto Muffler Tail Pipe Car Accessories for 1.5L-2.2L remove | Auto Oil Cooler Fits for Mercedes Benz SLK250 300 350 C250 E250 Replacement 0995002300 A0995002300 A099 500 23 00 remove | Easy Install Car Fan Control Switch High Performance Universal Start Cooling Radiator Engine Parts Capillary Thermostat Power remove | 6Pcs High Performance Fuel Injectors For Tacoma Tundra 4.0L 2005 4Runner 4.0L 2003-2009 Cruiser 4.0L Auto Parts Replacement Tool remove | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||||||||||
SKU | 1005003467813037 | 4001178464428 | 1005002695863266 | 4000114824139 | 4000467421079 | 1005003379658479 | ||||||||||
Rating | ||||||||||||||||
Price | $35.93 – $37.90 | $155.71 $155.71 | $3.16 – $19.97 | $33.93 $33.93 | $18.39 $18.39 | $47.26 – $49.85 | ||||||||||
Stock | Out of stock | Out of stock | 999 in stock | Out of stock | Out of stock | |||||||||||
Availability | Out of stock | Out of stock | 999 in stock | Out of stock | Out of stock | |||||||||||
Add to cart | ||||||||||||||||
Description | ||||||||||||||||
Content |
Bullet Points: 1、Compatible Models: Fits for Toyota Tacoma 2000-2004, for Toyota 4Runner 2.7L-L4 2000. 2、OE Number: 23250-75080 23209-79135. 3、High Performance: Compared with the original injector, and the atomizing is good, the combustion is more thorough, the power is increased, and the fuel is more economical. 4、Wide Features: Accelerate more smoothly, shift gears smoothly without frustration, reduce knocking, improve knocking phenomenon during rapid acceleration, no more frustration when the air conditioner starts and stops, energy saving and emission reduction. 5、Package Included: 4x injectors. If you have any questions, please contact us on jobs days and we will make it right for you within 24 hours. Description: Our fuel injectors are high performance and premium to replace those original parts. Installation: Clean up the environment around the fuel injector to avoid dirt being entrained in the engine when the fuel injector is subsequently disassembled, causing unnecessary pollution. Relieve the fuel pressure, and then remove the intake manifold cover and intake manifold. First unplug the plug from the injector. Then disconnect the vacuum pipe and the fuel return pipe from the fuel pressure regulator, and then disconnect the fuel hose from the distributor. Removing the fixing nuts on the distributor and the wiring harness frame. Removing the distributor, and then remove the injector from the distributor. Install a new gasket on the injector. Pay attention to apply a clean oil layer on the new O-ring first, and then install it on the injector. First insert the fuel injector into the distributor. Then apply a clean oil layer on the new sealing ring, and then press the injector into the intake manifold. (Note that the 0 ring is damaged, the injector should be installed on the distributor first, and then on the intake manifold) Replace the fuel hose with a new gasket and connect it to the distributor. Then connect the injector and the plug on the wiring harness, and connect the vacuum hose and oil return pipe to the fuel pressure regulator. Install the intake manifold and intake manifold cover. Turn on the starting switch, but do not start the engine. After the fuel pump runs for about 2 seconds, the fuel line pressure increases. Repeat the above two or three times, and then check for oil leaks. Compatible models: Fist for 2000-2004 for Toyota Tacoma, 2000 for Toyota 4Runner 2.7L-L4 OEM number: 23250-75080 23209-79135 Packing List: 4pcs*Fuel Injector Notes: Due to the lighting effects and shooting angles, the color of the item and that shown in the picture might have a nuance. Due to manual measurement, there might be a tolerance in the product size.
![]() ![]() ![]() |
![]()
Note : extra shipping fee will be charged for some remote area
All aliexpress shipping method may need 20 to 60 delivery time , express shipping is much more quickly and safe
Please check the OEM Number before purchase. This is the best way to confirm the fitment. Application For:
for BMW X1 2.0L 1997CC 122Cu. In. l4 GAS DOHC 2013-2015 for BMW X3 2.0L 1997CC 122Cu. In. l4 GAS DOHC 2013-2017 for BMW X4 2.0L 1997CC 122Cu. In. l4 GAS DOHC N20B20A 2015-2018 for BMW X5 2.0L 1997CC 122Cu. In. l4 GAS DOHC 2016-2018 for BMW Z4 2.0L 1997CC 122Cu. In. l4 GAS DOHC 2012-2016 for BMW 228i 2.0L 1997CC 122Cu. In. l4 GAS DOHC N20B20A 2014-2016 for BMW 228i xDrive 2.0L 1997CC 122Cu. In. l4 GAS DOHC N20B20A 2015-2016 for BMW 320i 2.0L 1997CC 122Cu. In. l4 GAS DOHC 2013-2018 for BMW 320i xDrive 2.0L 1997CC 122Cu. In. l4 GAS DOHC 2013-2018 for BMW 328i 2.0L 1997CC 122Cu. In. l4 GAS DOHC N20B20A 2012-2016 for BMW 328i GT xDrive 2.0L 1997CC 122Cu. In. l4 GAS DOHC Engine Designation: N20B20A 2014-2015 for BMW 328i xDrive 2.0L 1997CC 122Cu. In. l4 GAS DOHC N20B20A 2013-2016 for BMW 428i 2.0L 1997CC 122Cu. In. l4 GAS DOHC N20B20A 2014-2016 for BMW 428i Gran Coupe 2.0L 1997CC 122Cu. In. l4 GAS DOHC N20B20A 2015-2015 for BMW 428i xDrive 2.0L 1997CC 122Cu. In. l4 GAS DOHC N20B20A 2014-2016 for BMW 428i xDrive Gran Coupe 2.0L 1997CC 122Cu. In. l4 GAS DOHC N20B20A 2015-2015 for BMW 528i 2.0L 1997CC 122Cu. In. l4 GAS DOHC 2012-2016 for BMW 528i xDrive 2.0L 1997CC 122Cu. In. l4 GAS DOHC 2012-2016 OEM Number or Interchangeable Part Number: 11127588412, 15186739 Package Includes: Just as the picture shown ![]() ![]() ![]() ![]() ![]() |
|
Auto Oil Cooler Fits for Mercedes Benz SLK250 300 350 C250 E250 Replacement 0995002300
Features:
1. Quality material makes it antiwear, firm and durable to use.
2. Quickly cooling engine oil, reduce engine wear and increase power.
3. Easy to install, no complicated tools required, save effort and time.
4. Stable characteristics, professional performance, high reliability.
5. Replacing OE numbers for reference: 0995002300, A0995002300, A099 500 23 00, 099 500 11 00, 0995001100.
Specification:
Condition: 100% Brand New
OE: 0995002300, A0995002300, A099 500 23 00, 099 500 11 00, 0995001100
Fitment:
Fits for Mercedes-Benz C250 2012-2015
Fits for Mercedes-Benz E250 2014-2016
Fits for Mercedes-Benz SLK250 2012-2015
Fits for Mercedes-Benz SLK300 2016-2016
Fits for Mercedes-Benz SLK350 2012-2016
Package List:
1 x Oil Cooler
![]() ![]() ![]() ![]() ![]() |
<span "=""> Description:
1. Powerful Function: allows you set the temperature you wish the cooling fan to operate.
2. Start and Stop: the fan kick in at the set temperature and switch when the engine temperature goes back down.
3. Easy Install: remove the top radiator and fully insert the probe, then refit hose and tighten over the capillary wire.
4. Wide Use: suitable for use with any cooling fan, radiator, thermostat.Specifications:
Model: SI-AT31047
Material: plastic + metal
Color: black
Feature: adjustable, universal
Temperature range: 0-120
Placement on vehicle: engine
Package Included:
1PC * Car Fan Control Switch
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2cm differences due to manual measurement.
![]() ![]() ![]() ![]() |
Bullet Points: 1、Compatible Models: 2003 2004 2005 2006 2007 2008 2009 for Toyota 4Runner 4.0L-V6, for 2007 2008 2009 for Toyota Cruiser 4.0L-V6, for 2005 for Toyota Tundra 4.0L-V6, for 2005 for Toyota Tacoma 4.0L-V6. 2、OE Number: 23250-31060 23250-39075 23209-39075. 3、High Performance: Compared with the original injector, and the atomizing is good, the combustion is more thorough, the power is increased, and the fuel is more economical. 4、Wide Features: Accelerate more smoothly, shift gears smoothly without frustration, reduce knocking, improve knocking phenomenon during rapid acceleration, no more frustration when the air conditioner starts and stops, energy saving and emission reduction. 5、Package Included: 6*Fuel Injectors. If you have any questions, please contact us on jobs days and we will make it right for you within 24 hours. Description: Our fuel injectors are high performance and premium to replace those original parts.Installation: Clean up the environment around the fuel injector to avoid dirt being entrained in the engine when the fuel injector is subsequently disassembled, causing unnecessary pollution. Relieve the fuel pressure, and then remove the intake manifold cover and intake manifold. First unplug the plug from the injector. Then disconnect the vacuum pipe and the fuel return pipe from the fuel pressure regulator, and then disconnect the fuel hose from the distributor. Removing the fixing nuts on the distributor and the wiring harness frame. Removing the distributor, and then remove the injector from the distributor. Install a new gasket on the injector. Pay attention to apply a clean oil layer on the new O-ring first, and then install it on the injector. First insert the fuel injector into the distributor. Then pay attention to apply a clean oil layer on the new sealing ring, and then press the injector into the intake manifold. (Note that the 0 ring is damaged, the injector should be installed on the distributor first, and then on the intake manifold) Replace the fuel hose with a new gasket and connect it to the distributor. Then connect the injector and the plug on the wiring harness, and connect the vacuum hose and oil return pipe to the fuel pressure regulator. Install the intake manifold and intake manifold cover. Turn on the starting switch, but do not start the engine. After the fuel pump runs for about 2 seconds, the fuel line pressure increases. Repeat the above two or three times, and then check for oil leaks. Compatible models: For Toyota 4Runner 2009 Limited, SR5, Sport 4.0L V6-Gas For Toyota 4Runner 2008 Limited, SR5, Sport 4.0L V6-Gas For Toyota 4Runner 2007 Limited, SR5, Sport 4.0L V6-Gas For Toyota 4Runner 2006 Limited, SR5, Sport 4.0L V6-Gas For Toyota 4Runner 2005 Limited, SR5, Sport 4.0L V6-Gas For Toyota 4Runner 2004 Limited, SR5, Sport 4.0L V6-Gas For Toyota 4Runner 2003 Limited, SR5, Sport 4.0L V6-Gas For Toyota Cruiser 2009 Base 4.0L V6-Gas For Toyota Cruiser 2008 Base, Trail Teams Special Edition 4.0L V6-Gas For Toyota Cruiser 2007 Base, Special Edition 4.0L V6-Gas For Toyota Tacoma 2005 Base, Pre Runner, X-Runner 4.0L V6-Gas For Toyota Tundra 2006 Base, SR5 4.0L V6-Gas For Toyota Tundra 2005 Base, SR5 4.0L V6-Gas OEM number: 23250-31060 23250-39075 23209-39075 Packing List: 6pcs*Injector Notes: Due to the lighting effects and shooting angles, the color of the item and that shown in the picture might have a nuance. Due to manual measurement, there might be a tolerance in the product size. ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ||||||||||
Weight | ||||||||||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||
Additional information |
|
|
|
Reviews
There are no reviews yet.