21pcs Universal Auto Car Precision Disc Brake Caliper Tool Kit

Introductions:
This tool kit allows you to rewind the pistons in brake calipers by hand without damaging the gaskets in the pistons. It does this by allowing the rotation of the piston at the same time as pushing the piston back into the caliper.

Features:
1. This set includes both right and left hand threaded rewind tools
2. 2 pin fixed drives
3. 17 adaptors which fit a variety of modern cars
4. This kit enables the rewinding of pistons back into the core on most disc brake calipers this allows you to service and replace worn brake pads on both wind back and push back type brakes
5. Complete with sturdy blow molded case for storage and ease of transportation

Specifications:
1. Color: Gray
2. Dimensions: (12.99 x 8.86 x 2.36)" / (33 x 22.5 x 6)cm (L x W x H)
3. Weight: 6.61lb / 3kg
4. Quantity: 21 Pcs
5. Adaptable Car: Universal

Package Includes:
1 x 21pcs Disc Brake Caliper Wind Back Tool Kit

Kindly notes:
*This item can not send from the United States to other countries;
*This item can not send PO BOX address;
*This item can not send to the following remote districts:
PUERTO RICO, HAWAII ,VIRGIN ISLANDS ,ALASKA ,GUAM GU,AMERICAN SAMOA,NORTHERN MARIANA ISLANDS.

Automotive Leather 3-In-1 Complete Care - 16oz

Features:

• No left behind residue
• Repels dust, lint & stains
• Conditions leather surface to prevent cracking & fading
• Provides UV protection for all finished automotive leather & vinyl
• Safe for Use on All Finished Car Leather & Vinyl Surfaces
• Made in the U.S.A.

• 【SUPER POWERFUL & COMPACT】This compact (7.5*3.4*1.4-inch) & lightweight (615g), yet powerful 2000A peak output jump starter has no problem starting most vehicles with gas engines up to 8.0L or diesels engines up to 6.5L.
• 【HIGH-SPEED CHARGING PORTS】Aside from normal charging ports, this portable jump starter is also equipped with a smart USB output that provides the fastest charging speed for your portable electronic devices.
• 【ULTIMATE SAFETY】The advanced intelligent protection clamps with a LED screen can provide over-current protection, short circuit protection, over-load protection, over-voltage protection, over-charge protection, etc. to ensure safety.
• 【3-IN-1 MULTIFUNCTIONAL LED FLASHLIGHT】The battery jump starter has a built-in LED flashlight with 3 modes (lighting/SOS/strobe) for emergency and night time use. You can use this car jump starter for illumination purposes or to signal an emergency.
• 【Non-stop Customer Service】We provide unlimited customer service support and tech support. Questions will be responded to within 24 working hours. DBPOWER Jump Starter comes with a ballistic type carrying case. It is the number 1 essential thing you should keep in your car. Click “Add to Cart” now – You won't regret it!

A Must Have for Every Driver

This jump starter with 2000A peak power is capable of starting all 12V battery vehicles with up to 8L gas and 6.5L diesel engines. With this in-hand, there's no need to wait for breakdown assistance or ask for help from a stranger.

Fast Charging Speed Technology

The added QC3.0 charging ports provide four times the charging speed of normal charging ports, which saves you a lot of time.

Powerful LED Flashlight

The ultra-bright LED flash light has 3 illumination modes; a flash light when you're in the dark, a strobe light to attract attention, and an SOS signal flash when you're outdoors and in need of emergency help.

Ultimate Safety

The advanced intelligent protection clamps with a LED screen can provide over-current protection, short circuit protection, over-load protection, over-voltage protection, over-charge protection, etc. to ensure safety.

1x DBPOWER Portable Car Jump Starter

1x Jumper Clamps Set

1x USB Type C Cable

1xSemi-hard Case

1x User Manual

（NO adapter included, 5V universal adapter compatible）

Attention:

1. Avoid being squeezed or impacted by powerful external force while in storage or using;

2. Please close the rubber stopper after using the jump starter. Otherwise, other external metal part will enter and connect the positive and negative terminal and cause damage.

3. This device applies to petrol engines up to 8.0L and diesel engines up to 6.5L. Please do not start a vehicle with a higher engine capacity.

4. Don't crank the engine for more than 3 seconds. Allow the jump starter to cool down at least 1 minute after each start.

5. If the instructions are followed correctly but your vehicle doesn't start instantly, please wait for 5-10 minutes and try again.

Car cannot start? Pump not working? Engine conked out? And you realise that they all have a common problem. Flat battery. Now you can prepare for such unforeseen circumstances with our high-performance CT-7000, a powerful 7A Battery Charger that is compatible with all 12V and 24V lead-acid batteries (WET/MF/CA/EFB/GEL/AGM), 12V lithium-ion batteries and 12V AGM+ batteries. Fully automatic and easy to connect and use, the charger is your godsend in bringing life to dead batteries. The internal intelligent microprocessor makes charging faster, easier and safer. It provides continuous charge to batteries with an automatic floating charge mode and there is an inbuilt 6-way protection for sparks, reverse polarity, short circuits, overcurrent, overcharging and overheating to protect both use and battery. This means safe charging with total peace of mind. The charger comes with nine charging modes to suit your requirements. On SUPPLY mode, the charger becomes a secure 12V power source and can even be connected to vehicles to retain the on-board computer settings during battery repair or replacement. Portable and lightweight, the charger is equally useful to you on the road as it is in your workshop, garage or shed. If setting up in your workshop, you can easily mount the charger to your desired location using the mounting holes and included self-drilling screws. Never let your power down again as you power up with our battery charger.

Features:
Independent selection mode for 12V/24V battery
Built-in intelligent microprocessor
6-way protection: spark proof, reverse polarity, short circuit, overcurrent, overcharge, overheat
9 charging modes: Standby, 12V NORM, 12V COLD/AGM, 24V NORM, 24V COLD/AGM, 12V AGM+, 12V LITHIUM-ION, REPAIR, 13.6V SUPPLY
REPAIR mode: repairing old, idle, stratified or sulphated batteries (LEAD-ACID batteries only)
SUPPLY mode: can be used to retain a vehicle’s on-board computer settings during battery repair or replacement
8 fully automatic charging steps
Detailed error lights
Battery level indicator
Clamps and ring connectors
Four external holes for mounting (screws included)
Auto-memory: returns to last selected mode when restarted (except Standby Mode)
Automatic switching to maintenance status once fully charged without overcharging or damaging battery
Temperature controlled
Lightweight and highly portable
Tough and robust
SAA & CE approved

Specifications:
Model: CT-7000
AC input: 220V-240V, 50Hz-60Hz, 1A,120W max
DC output: 12V, 7A; 24V, 3.5A
Ambient temperature: 0℃-40℃
Charger type: 8 steps, fully automatic charging cycle
Battery compatibility: All types of 12V and 24V lead-acid batteries, 12V AGM+ batteries and 12V lithium-ion batteries
Battery capacity: 14Ah-230Ah (12V), 14Ah-115Ah (24V), Maintains All Battery Sizes
Cold/AGM mode: YES
Supply mode: YES, 13.6V/5A
Housing protection: IP54

Package Contents:
1 x 7A Battery Charger
1 x User Manual